HP PROLIANT DL380 G4 SCSI CONTROLLER DRIVER

The drives in this setup are not even connected to the onboard Smart Array 6i controller. The SCSI controller traditionally only worked if there wasn’t anything connected to the pin SCSI connector on the edge of the motherboard see 1 below. Also, while inserting the SmartStart CD 7. Server Fault works best with JavaScript enabled. HP controllers never present RAW disks.

Uploader: Ganris
Date Added: 11 August 2009
File Size: 8.16 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 54375
Price: Free* [*Free Regsitration Required]

windows server – Formatting an HP ProLiant DL G4 – Server Fault

Sign up using Facebook. Change the configuration to what’s described in the diagram above, and you’ll be able to use the onboard HP controller.

If you do have a card installed and there’s a pin SCSI cable connecting it to the backplane, remove the cable s and change to the above configuration.

I’m thinking it’s a card, gg4 you have a couple of options to get this working.

I changed it according to the diagram you gave and Voila! As you guessed, there was just an Adaptec controller in the PCI slot with the drive backplane cabled to it. I’ll try to follow these steps and check the status and let you know of the outcome.

  ASUS P4S333 AUDIO DRIVER

DL380 G4 Controllers

Sign up using Email and Password. Post as a guest Name. For one, it doesn’t seem to be detecting any Hard Drives attached ckntroller the Server. HP controllers never present RAW disks.

The drives in this setup are not even connected to the onboard Smart Array 6i controller. Also, directly installing the OS MS Server Standard Edition obviously doesn’t work shows no hard disk found Could anyone please prolianr as to what other needs to be done to format my server?

Unfortunately, I cannot seem to do so. Thanks a lot for the response and the detailed explanation. Thanks a lot, Mr. The key to this are the drive backplane and the motherboard connections.

Sign up or log in Sign up using Google. You mean, software Sfsi After doing that, you will be able to format it.

I’ve built many of these systems I went through some questions here on ServerFault and the HP guides here but they weren’t of much help to a n00b like me. Your issue is an easy fix.

By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service. Post Your Answer Discard By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your continued use of the website is subject to these policies.

  ESS ES1869F AUDIO DRIVER DOWNLOAD

By clicking “Post Your Answer”, you acknowledge that you have read our updated terms of serviceprivacy policy and cookie policyand that your continued use of the website is subject to these policies. The jumper cable 2 is key.

DL G4 Controllers

Home Questions Tags Users Unanswered. Try to make sure the backpane is properly connected I have had them dc frequently after transport. Email Required, but never shown. This assumes you don’t have any PCI-X cards in the riser cage. There are several prliant options in this system; simplex, duplex and a few bypass arrangements that enable the use of higher-end RAID controllers.

Also, while inserting the SmartStart CD 7. Server Fault works best with JavaScript enabled. You want your backplane-to-motherboard connection to look like this assuming you wish to see all six drive bays on the motherboard controller.